MotionCam (PhOD) Fibra

Wired IR motion detector supporting photo by alarm, photo on demand, photo by schedule, and photo by scenario features

New standard on intrusion detection

MotionCam (PhOD) has a built-in camera that takes photos once the detector is triggered. It needs just 9 seconds to show the actual situation on the scene. With visual evidence available in Ajax apps, the security company can quickly check whether the threat is real to respond accordingly. Photo verification relieves users of unnecessary anxiety and security companies of false patrol calls. It takes a click for the user to take an on-demand photo at any time to monitor the house's state. Also, the detector can automatically take pictures by an alarm of another device in the system and by a specific schedule.

4 types of photo verification

Photo by Alarm

Photo on Demand

Photo by Scenario

Photo by Schedule

IR backlight

under low-light conditions

9 seconds to deliver the first photo¹

Vertical viewing angle

Horizontal viewing angle

Up to 40 ft

Motion detection distance²

Software algorithm to prevent false alarms

Pet immunity

Temperature compensation

Effective detection in the heat and cold

Up to 6,562 ft

range of communication with an Ajax hub

Fibra wired communication

Power adjustment

In-line connection with different types of devices

Informative in-app notifications

10:00

Ajax

Warehouse: Motion detected, MotionCam (PhOD) in Storage area

10:00

Ajax

Office: Lid is closed, MotionCam (PhOD) in Hall

Low power consumption

Up to 0.12 W

Remote control and configuration

Two colours

Compatible hubs

Check

MotionCam (PhOD) Fibra is a device of the wired Fibra product line. Only accredited Ajax Systems partners can sell, install, and administer Fibra products.

Apply for access

Wherever there is a risk of intrusion

Industrial premises

Store

Educational institution

Metal warehouse

Discover future-proof hardware

Photo verification

Peace of mind on demand

MotionCam (PhOD) needs just a few seconds to show the actual situation on the scene and dispel the user's doubts in case of an alarm. It takes a click in the Ajax app to take an on-demand photo. Also, it can automatically take pictures at specific times or when selected devices in the system activate an alarm.

Privacy first

MotionCam (PhOD) is designed to control security, not privacy. Photos are protected from prying eyes at the detector, system, and software levels.

Strict permission distribution

The Privacy menu in Ajax apps helps accurately adjust access to visual data for users and security company operators: who and when can request a photo, which detector can take on-demand photos, and who can view the received pictures or streams from integrated surveillance cameras.

Detailed event log

The event log records 500 recent events within the system. The data is explicit with the device, time, and event description. On-demand photos are linked to the user who requested them. Photos can be received only by users with the Photo on Demand access. Security companies do not receive the photos.

Encryption and GDPR

Photos are encrypted at every stage of transmission. Only system users can access the virtual Ajax Cloud storage and view photos. While stored, no photos are processed or analysed. The Ajax Cloud service is hosted on geographically distributed servers that meet the General Data Protection Regulation (GDPR) requirements.

Also, the Ajax product portfolio includes the MotionCam Fibra detectors without Photo on Demand, Photo by Schedule and Photo by Scenario functions.

Learn more

Detection

No intruder goes unnoticed

PIR sensor

All Ajax motion detectors use PIR sensors by Excelitas Technologies — a field-leading American manufacturer specializing in designing and producing optronic components since 1931. Ajax Systems constantly proves the sensor's superior quality at the production stage: we test 100% of manufactured devices. Wrapped into Ajax technologies, it brings the utmost accuracy of intrusion detection.

Special lens

The pattern of the Fresnel lens sections is designed to differentiate between the IR diagrams of a human, animal, and thermal noise. Large lens sections capture radiation at an adult's head and torso level. Smaller sections make the diagram more detailed. The lens provides the detector with accurate information about the thermal object in the detection zone and the nature of its movement.

Thermal interferences filter

We processed thousands of thermal patterns caused by humans, animals, and the environment to develop the SmartDetect software algorithm. In armed mode, the detector constantly analyses the thermal diagram from the PIR sensor, including the IR radiation intensity, thermal spot size, movement speed, time spent in the detection zone, and other parameters. The algorithm identifies false alarm markers instantly and with high accuracy. As a result — the detector accurately responds to human motion without false alarms.

False alarm

Real alarm

False alarm

Real alarm

False alarm

Real alarm

Temperature compensation

Temperature compensation is a software mechanism keeping the thermal diagram contrast even if the ambient temperature is close to the temperature of the human body. With each ambient temperature measurement, the detector corrects the PIR sensor data according to the coefficient table stored in its memory. The detector is effective over the entire operating temperature range.

Sensitivity level

The detector can adapt to the conditions of a particular facility, considering possible thermal interference or pets. The sensitivity setting changes the set of markers by which false alarms are filtered. Low sensitivity makes the detector less likely to respond to an active pet. A high sensitivity will raise the alarm in case of any motion in the detection zone.

Professional installation

With the correct installation at the height of 2.4 m and lens direction perpendicular to an alleged intrusion path, the detector provides an accurate thermal diagram and pet immunity. It instantly responds to a real threat, minimising false alarms caused by animals weighing up to 20 kg and below 50 cm in height.

Fibra

Unique wired technologies

The Ajax system uses secure two-way communication based on Fibra proprietary protocol. It features encryption and device authentication to prevent sabotage, spoofing, or data theft. Fibra lines are multifunctional and support connecting different types of devices to one line: sirens, keypads, and detectors with photo verification.

Learn more

Up to 6,562 ft of wired communication with a hub
One line for different types of devices
Photo delivery by Fibra line without interference
Protection against sabotage and spoofing

Energy efficiency as a priority

Fibra communication requires minimum power consumption. Also, MotionCam (PhOD) is hardwired with a backup battery to power the sensor, LED indicator, and camera during alarms. The battery has an optimized charging algorithm which uses the minimum energy required to fully recharge without affecting other connected devices.

Built-in backup battery
Optimized charging algorithm
Power consumption of up to 0.12 W

Sabotage-resistant

Tamper alarm

The enclosure is hardwired with two tamper buttons, which notifies the security company and users once the detector is dismantled from the mounting panel.

Protection against short circuit

The system instantly detects a short circuit on the line and notifies the security company and the users. And when the problem is fixed, there is no need to replace the fuses: the system will restore operation automatically.

Data encryption

All data the system stores and transmits is protected by a block cipher with a dynamic key. Encryption makes it extremely difficult to reprogram the detector, replace or steal the data.

Data-rich notifications

The Ajax system instantly notifies about alarms and events with informative notifications: security companies and users know exactly which device triggered, when and where it happened.

Data backup in case of connection loss

When the Fibra line breaks during the sabotage attempts, the detector continues to operate from a built-in battery. Alarms with photo verifications will be stored in the detector's buffer memory. Once the connection with the hub gets restored, all data is sent to Ajax apps and CMS.

Device authentication against spoofing

The hub checks the device's unique parameters for authentication during each communication session. If any parameter fails the check, the hub ignores device commands.

Regular polling

The device regularly exchanges data with the hub. The system controls each device state and reports if there is a malfunction or connection loss.

PRO is king

The myth about wired systems being difficult to install is busted. Ajax minimized an expensive, long, and dusty experience for PROs by developing an ultimate set of tools to make the process easy and flexible, from project design to client support and system maintenance. There is no need to disassemble the device for installation. Intuitive Ajax apps help quickly make the device a part of the system, and each device can always be reconfigured remotely without site visits. No need for programmers — everything is available out-of-box.

Fibra power supply calculator

The online tool provides security specialists with comprehensive information about the devices’ power consumption. It's easy to check before installation whether the wired system project will work in practice. The calculator allows real-time project-making, highlighting the problem areas and offering solutions. Once the calculations are finished, the results can be downloaded as a PDF file.

Learn more

With the SmartBracket panel, an installer can effortlessly mount the device on the wall. The installation kit includes all the necessary fasteners. There is no need to disassemble the device: the board with terminals is placed outside the enclosure under SmartBracket to eliminate hardware damage during installation. The board is removable, which makes the whole process more comfortable. For cable management, there are bracings inside SmartBracket to secure the wires with ties. The detector can be installed sideways: the enclosure has two tampers on the left and right sides.

No need to disassemble the detector’s enclosure
Can be installed sideways
Removable terminal board
All the necessary fasteners included in the installation kit
Holding screw to secure the detector on a mounting panel

The device is paired with the hub automatically via Fibra line scanning. This tool is available in the desktop or mobile PRO apps. An installer only needs to name the device and assign it to the room and security group. The device can also be added by scanning the QR code or entering its ID manually.

Pairing with a hub via automatic line scanning or QR code
Device identification by triggering or LED indication
Optimal default settings to cover major requests

Intuitive Ajax apps provide remote set-up and all detector information from anywhere the Internet is available, on a smartphone or PC. An installer can remotely change the settings and provide services in-time. No need to visit the object.

Apps for iOS, Android, macOS, and Windows
Remote configuration without site visits
Accounts for companies and installers

MotionCam (PhOD) Fibra Fibra has two-way communication and ultimate informativeness. The security company will receive an alarm notification in less than a second. Notifications include all the necessary information: name of the device, time of the event, and even the exact room where the device is located. CMS also receives photo verification, capturing the reason for the alarm.

Full addressability of connected devices
Instant notifications in Ajax apps
Alarms and events monitoring in PRO Desktop for security companies
Out-of-the-box photo verification support

Technical information

MotionCam (PhOD) Fibra

With default settings (photo resolution is 320×240 px).

According to INCERT certification, detection range is up to 10 m.